Just remember you need a preamp for a TT. The tape out on your receiver would be where you could take the signal... woodshedaudio@comcast.net wrote: > Again. If you have a Mac, use the mic/line in jack. > You can record to Garageband,Quicktime,Toast anything. > You don't need external hardware/converters/software if all you want to do is > record audio from an external source (i.e. a cassette or record player). > Remember to set the input source of the program to mic/line in. > ----- Original Message ----- > From: "Stephen Curtis" > To: audities@smoe.org > Sent: Tuesday, January 26, 2010 8:09:57 AM GMT -05:00 US/Canada Eastern > Subject: Re: RCA-to-USB/FireWire adapter and software > > If you're looking for something relatively simple, try Behringer. It comes with mac software. > > http://www.zzounds.com/item--BEHUCA222 > > > > ----- Original Message ---- > From: Don Stroud > To: Audities > Sent: Mon, January 25, 2010 7:22:23 PM > Subject: RCA-to-USB/FireWire adapter and software > > Hi there everyone! I was at Best Buy this afternoon, and found two products that would allow me to connect any RCA-type audio equipment (like a turntable or cassette deck) to a computer via a USB adapter. However, the software included for both products only runs on Windows, and I am a Mac guy. > > So my question to those of you in the know is: if I were to get the adapter/cable thing, would I be able to use Soundtrack Pro to record the output from my analog/RCA device? Or is there a product specifically for Macs that bundles the hardware and software? > > Thanks in advance! > > Don > http://www.donaldstroud.com > http://www.cafepress.com/nocean_studios > > NP: The Woods - "Battleship Chains" > > > > > > ======================================================================= > Detailed Audities-List information: > To manage your Audities List settings or unsubscribe: > > > > > > > -- Ronald Sanchez Director of A&R www.CareerRecords.com www.Donovans-Brain.net