smoe.org mailing lists
ivan@stellysee.de
From | "Judy B" <HeyJude@socal.rr.com> |
Subject | Re: CD recorder |
Date | Mon, 14 Jun 2004 16:21:54 -0700 |
[Part 1 text/plain iso-8859-1 (2.9 kilobytes)]
(View Text in a separate window)
I love Total Recorder, too, Miguel! I think I paid $12 for it. I record a
lot of shows and music on the computer, and Total Recorder works great for
me! I haven't tried transferring from vinyl or cassette, yet, though!
Thanks, Miguel!
Judy
----- Original Message -----
From: "Miguel Motta" <a2j@bellsouth.net>
To: <audities@smoe.org>
Sent: Monday, June 14, 2004 1:47 PM
Subject: Re: CD recorder
> An "addendum" to my own post... It just occured to me that another simple
> method of transferring your vinyl to PC in preparation for burning a CD is
> to use a great software utility called Total Recorder... TR has the
ability
> to "capture" any sound that your PC is capable of reproducing through its
> speaker (including internet streaming audio).. So following my
> recommendations below you can capture the song coming from the turntable
as
> it's being played via the mixer into your pc soundcard... TR can save each
> cut from the record onto the PC's hard drive then Clean 3.0 can finish the
> job...
>
>
> ----- Original Message -----
> From: "Miguel Motta" <motta_m@firn.edu>
> To: <audities@smoe.org>
> Sent: Monday, June 14, 2004 4:21 PM
> Subject: Re: CD recorder
>
>
> > The easiest method I've tried is using a small inexpensive mixer (I got
a
> > very simple model thru DAK online but Radio Shack probably has some)...
> > Hooking up the turntable to the receiver then to the mixer going out
into
> > your soundcard (Soundblaster Audigy 2 one of the best)... As far as
> programs
> > I've found the best recording software to be Steinberg's WavLab... The
> > advantage of WaveLab is that it allows you to manipulate the recorded
> > soundwave, editing cuts, fade-outs, etc. with ease... Prior to WaveLab I
> use
> > Steinberg's Clean 3.0 this utility has a very simple learning curb which
> > becomes second nature after you master it... It allows for declicking
all
> > pops and clicks on the recorded vinyl and will even convert the wav to a
> > Surround Sound Mix... then you can take it to WavLab and put on final
> > touches if desired (many times not needed after Clean 3.0 is finished
> > cleaning up the recording)... After which, of course, you are ready to
> burn
> > your WAV's to CD... This method has proven excellent as I have saved $$$
> by
> > burning my own copies of LP's that are either no available on CD, out of
> > print or beyond my financial reach on Ebay... Cheers!
> >
> > PS I could also use my ProTools for vinyl transfer, but that's another
> > story...
> >
> >
> > ----- Original Message -----
> > From: "Sager, Greg" <greg.sager@bankofamerica.com>
> > To: <audities@smoe.org>
> > Sent: Monday, June 14, 2004 4:07 PM
> > Subject: Re: CD recorder
> >
> >
> > > Thanks, everyone. This has been very helpful.
> > >
> > > And if anyone else has grappled with the project of converting their
> > > cassette and vinyl music to CD-Rs, please feel free to chime in.
> > >
> > >
> > > Gregory Sager
> >
>
>
For assistance, please contact
the smoe.org administrators.