Sign In Sign Out Subscribe to Mailing Lists Unsubscribe or Change Settings Help

smoe.org mailing lists

                 Substitution variables and file templates

When Majordomo sends a reply message in response to a request, the document
that it sends is usually a template.  The template may have one or more 
keyword variables, for which Majordomo automatically substitutes the 
appropriate value.  Substitution variables are composed of a leading
dollar sign, followed by capital letters and underscores.

For example, when you use the command
   help overview
Near the end of the document, it says
   Majordomo 2, version $VERSION
However, what you see on your screen is
   Majordomo 2, version 0.1200401130

Majordomo automatically substitutes the version number for the 
VERSION keyword variable.

The most important use of variable substitutions is in the faq, info,
and intro files that are available through the commands with the same
names.  Substitution variables are also used by some configuration
settings and by the announce and help commands.

Substitution variables are not the same as access rule variables.  See
"help access_variables" for more information about access variables.

As an example of a variable, using this string in a file
  $MJ
will cause the the address of the majordomo email interface to be
inserted before the user sees the file contents.

When you edit a document that contains substitution variables, be
certain to leave enough space for the text that will replace each
variable.  Otherwise, some lines in the document may be longer than you
expected.

Variables that are not supported by a particular document or
configuration setting will remain unaltered.  See "help error_files",
"help format_files" and "help reply_files" for a list of documents and
the substitutions that they support.

The $INCLUDE variable can be used to incorporate a separate document
into the current document.  This variable must be followed by a dash and
the location of a file within the file space of your mailing list.  For
example, the following substitution:

  $INCLUDE-help/topics

will include the contents of the "help topics" document into the current
file.  The line that contains the substitution must end immediately
after the file location.  

Included files can also use the $INCLUDE substitution, but more
than 3 levels of nesting is taken to be an infinite loop, which will
cause an error message to be displayed.

The $INCLUDE substitution is supported by reply files, but not by error
files or format files.

If you misspell a variable, or use one that is not defined, it will
appear exactly as you typed it, including the dollar sign.

You can keep variable evaluation from happening by preceding the
dollar sign with a backslash, as in
  \$MAJORDOMO
which will appear as simply "$MAJORDOMO" after the substitutions are
finished.

In addition, the text can be padded and justified, as illustrated
in this example:
  $LIST:-18 X $COMMAND:11

The name of the mailing list is padded with spaces to at least 18 characters
and left-justified.  The command is padded to at least 11 characters and
right-justified.  If the mailing list name is "aardvark" and the command
is "subscribe" then this line would be displayed as
  aardvark           X   subscribe           

Padding in this manner is very useful for commands, such as who-enhanced,
that display a table of data with each column aligned properly.

See "help get" and "help put" for information on how to see, change,
or create the error, format, and reply files that use these substitutions.


Standard substitution variables
-------------------------------

There is a set of standard substitutions, that apply to most
of the Majordomo error, format, and reply files.  Their names and values
(in the context of the GLOBAL list) are shown in the following list.  Naturally, 
some of the variables (LIST, OWNER, REQUEST, SUBLIST, and WHOAMI)
will vary depending upon the mailing list.

$ARCURL      
  (The URL that allows access to an external archive.  This value is
   determined by the archive_url configuration setting;  see 
   "help configset_archive_url" for more information.)

$CONFIRM_URL http://www.smoe.org/cgi-bin/mj_confirm/domain=smoe.org?t=
  (The location of the WWW interface to confirm a subscription,
   posted message, or other Majordomo command.)

$DATE
  The date at which a request was originally issued;  in some cases
  this may be the Date header from a posted message.

$DOMAIN      smoe.org
  (The name of the current domain, as determined at installation time)

$LIST        GLOBAL
  (The name of the current mailing list, or GLOBAL)

$MJ          mj2@smoe.org
  (The e-mail address of the majordomo server)

$MAJORDOMO   mj2@smoe.org
  (The e-mail address of the majordomo server)

$MJOWNER     mj2-owner@smoe.org
  (The e-mail address of the administrator of this domain)

$OWNER       mj2-owner@smoe.org
  (The e-mail address of the administrator of the current mailing list)

$PWLENGTH    4     
  (The minimum length of a new password.  See "help password" and 
   "help admin_passwords" for details.)

$REQUEST     mj2@smoe.org   
  (The "request" address for a mailing list)

$SITE        smoe.org mailing lists
  (A description of this domain, taken from the site_name configuration
   setting.)

$SUBLIST     
  (An auxiliary list, if one is used.  See "help auxiliary_list" for details.)

$UCLIST      GLOBAL
  (The name of the current mailing list, in capital letters)

$VERSION     0.1200401130
  (Which version of Majordomo 2 is used at this site.)

$WHEREAMI    smoe.org
  (The name of the current domain.)

$WHOAMI      mj2@smoe.org
  (The list address, or the Majordomo server address in a GLOBAL context.)

$WWWADM_URL  http://www.smoe.org/cgi-bin/mj_wwwadm/domain=smoe.org
  (The location of the WWW interface for list administrators)

$WWWUSR_URL  http://www.smoe.org/cgi-bin/mj_wwwusr/domain=smoe.org
  (The location of the WWW interface for list subscribers)

Other variables
---------------

In time, a complete list of the other substitutions supported by 
the error, format, and reply files will be presented here.

See "help error_files" for a description of each of the error files.
See "help format_files" for a description of each of the format files.
See "help reply_files" for a description of each of the reply files.

$ACKDENY_CHECKBOX
$ACKPOST_CHECKBOX
$ACKREJECT_CHECKBOX
$ACKSTALL_CHECKBOX
$ELIMINATECC_CHECKBOX
$HIDEADDRESS_CHECKBOX
$HIDEALL_CHECKBOX
$HIDEPOST_CHECKBOX
$POSTBLOCK_CHECKBOX
$PREFIX_CHECKBOX
$REPLYTO_CHECKBOX
$REWRITEFROM_CHECKBOX
$SELFCOPY_CHECKBOX
  Check boxes for HTML forms used by the WWW interfaces to display a
  personal setting for a particular subscription.

$ADDRESS
  An e-mail address.

$ALIASES
  The mail aliases required by your system's message transport 
  software for one or more mailing lists.

$ALL_FOOTERS
$ALL_FRONTERS
  All of the list's message_footers and message_fronters, respectively (if
  any), separated by blank lines.

$APPROVALS
  The number of people who must use the accept command to approve
  a stalled request.

$ARCHIVE
  The archive name of a posted message, for example "200008".
  This is not the same as the sequence number;  see "help archive"
  for more details.

$AUTHOR_NEXT
$AUTHOR_PREV
$DATE_NEXT
$DATE_PREV
$NUMERIC_NEXT
$NUMERIC_PREV
$SUBJECT_NEXT
$SUBJECT_PREV
$THREAD_NEXT
$THREAD_PREV
  These substitutions contain the message numbers of the next and
  previous messages within a mailing list archive, depending upon
  the order in which the messages are sorted.

$BOUNCE_DATA
  This substitution displays statistics and diagnotic messages for
  addresses to which a posted message could not be delivered.

$BOUNCE_PERCENT
  This variable contains the percentage of posted messages that have
  bounced for a particular address.

$BOUNCES_DAY
$BOUNCES_MONTH
$BOUNCES_WEEK
  These variables contain the number of delivery failures for a
  particular address in the specified period of time.

$CAN_READ
  This boolean variable is true if the person making a request has
  permission to use the archive command for a particular mailing
  list.

$CATEGORY
  A configuration setting category.

$CGIDATA
  A supplementary part of the URL of the current CGI script, for use
  in the web interfaces when the URL is used in an anchor 
  ("<a href=...>").

$CGIURL
  The URL of the current CGI script, when one of the web interfaces
  is being used.

$CHANGED
  This substitution is used by the password command to indicate whether
  or not the password was changed or merely reported.  Its value is " "
  if the password was changed, and '' otherwise.

$CHARSET
  The character set of a message or part of a message.

$CHUNKSIZE
  The number of addresses displayed at one time by the who command
  in the wwwadm interface.

$CMDLINE
  The command line that would be used to issue a command via e-mail
  or the mj_shell program.

$CMDPASS
  The password with which the current command was issued.

$COMMAND
  The name of a Majordomo command.

$COMMENT
  A description of a configuration setting or category.

$CONSECUTIVE
  The number of consecutive messages to a particular address that have 
  bounced.

$CONSULT
  " " if the type of a stalled command is "consult"; '' otherwise.
  "consult" means that the moderators must confirm the command.

$CONTENT_TYPE
  The content type of a message or part of a message.

$COUNT
  The number of settings in a particular configuration category.
  Also, the number of commands processed by the command parser.
  Also, the number of attachments in a message processed by the
  command parser.

$DESCRIPTION
  A description of a mailing list, as determined by the description
  and description_long configuration settings.  Also, a description
  of a digest, as determined by the digests configuration setting.

$DIAGNOSTIC
  The explanation for a delivery failure that is extracted from a bounce
  message.

$DIGESTNAME
  The name of a digest, as determined by the digests configuration
  setting.

$ELAPSED
  The amount of time, in seconds, required for a command to execute.

$EXPIRE   
  The number of days before a request that has been stalled expires, or
  in some cases the date at which it will expire.  This value is
  determined by the token_lifetime configuration setting 
  (see "help configset_token_lifetime" for details).

$EXTRA
  The contents of the "extra" CGI parameter, which usually contains
  arguments for a command.

$ERROR
  An error message which describes why a command failed.

$FAIL
  " " if a command invoked with the "accept" or "default user" command 
  failed; '' otherwise.
  Also, a count of commands that failed.

$FINISH
  The date of the latest of a group of messages or requests.

$FOOTER
$FRONTER
  The list's message_footer and message_fronter, respectively.  If there
  are multiple fronters or footers, the first of each will be used.

$FULFILL
  The date at which a delayed request will be completed
  (see "help delay" for more information).

$HANDLER
  When a bounce message is presented in a recognizable format, this
  variable contains the name of the format (e.g., "DSN" or
  "Compuserve").

$HOST
  The host from which a posted message is distributed to the subscribers
  of a mailing list.  This value comes from the resend_host configuration
  setting (see "help configset_resend_host" for more details).

$INACTIVE
  " " if the "active" configuration setting of a newly created mailing
  list is off; '' otherwise.

$ISPOST
  " " if a token refers to a stalled posted message; '' if a token
  refers to a Majordomo command.

$ISSUES
  The number of issues of a digest that were delivered.

$LAST_RUN
$NEWEST_AGE
$NEXT_RUN
$OLDEST_AGE
  The status of a particular digest:  when it was last issued, when the
  next issue might be delivered, and the ages of the oldest and newest
  messages that are awaiting delivery.

$LINE
  The line number at which a pattern matched part of the body of a 
  posted message.

$LINES
  For the configshow command, this is the number of lines occupied
  by a multi-line configuration setting value.
  In the command parser, this is a number of unrecognized lines
  that are skipped because the parser does not recognize them as
  part of a command.

$LOCATION
  In error messages for invalid e-mail addresses, this variable contains
  the invalid portion of the address.  In taboo match descriptions, this
  variable contains the text that matched.

$MAX_AGE
$MAX_MSGS
$MAX_SIZE
$MIN_AGE
$MIN_MSGS
$MIN_SIZE
  Constraints on digest delivery, as determined by the digests 
  configuration setting.

$MAXLENGTH
  The size limit on a posted message, as determined by the maxlength
  configuration setting.

$MESSAGE_ID
  The message ID, from the "Message-Id" header, of a posted message.

$MODE
  The command mode.  For example, the command mode of the "who-enhanced"
  command would be "enhanced."

$MSGNO
  The archive name and number of a posted message, for example
  "200008/12".  This is not the same as the sequence number.  
  See "help archive" for more details.

$NEEDCOPY
  The list of addresses that need to be replied to in order for everyone
  who received a copy of the original messages to receive a copy of the
  reply.  This generally includes the list address plus the address of any
  non-list-members whose addresses appear in the To: and CC: headers.

$NEWADDRESS
  The e-mail address to which a command or posted message is forwarded.

$NEWCOMMAND
  The Majordomo command that should be used instead of an obsolete
  command (e.g., "configset" instead of the obsolete "newconfig").

$NEWLIST
  The most recent name of a mailing list that has been created,
  renamed, or destroyed with the createlist command.

$NOARCHIVE
  " " if the archive for a new mailing list was not created
  automatically; '' otherwise.

$NONMEMBER
  "  " if an address is not subscribed to the mailing list;
  '' otherwise.

$NOTIFIED
  " " if an acknowledgement message was sent to the victim of a
  command; '' otherwise.

$OLDALIASES
  The original aliases of a mailing list that has been renamed with
  the createlist command.

$OLDLIST
  The original name of a mailing list that has been renamed with
  the createlist command.

$PART
  The part number of one part of a posted message.

$PASSWORD
  The personal password corresponding to a particular e-mail address,
  or the master password of a newly created mailing list.

$PATTERN
  A pattern listed in the taboo_headers configuration setting, or
  another related setting.
  
$QSADDR
  An e-mail address, altered to allow it to be included safely in the
  query string of a URL.

$RANDOM_FOOTER
$RANDOM_FRONTER
  A randomly chosen message_footer and message_fronter, respectively.

$REMIND 
  The number of days before a reminder for a request that requires
  confirmation, is sent to the person whom the request affects.
  This value is determined by the token_remind configuration setting
  (see "help configset_token_remind" for details).

$REASONS
  The reasons, supplied by the access rules, that a request was denied
  or stalled (see "help configset_access_rules" for more details).

$REQUESTER
  The e-mail address from which a Majordomo request was sent.

$SENDER
  The e-mail address from which a posted message was sent, or the
  envelope address used by a mailing list to deliver messages to the
  subscribers.

$SEPARATOR
  A line, in an e-mail message, that the command parser considers
  a signature separator (see "help configset_signature_separator"
  for more information).

$SEQNO
  The sequence number of a message posted to a mailing list.  This
  value comes from the sequence_number configuration setting (see
  "help configset_sequence_number" for more information).

$SESSIONUSER
  The e-mail address of the person who initiated a majordomo session.

$SETTING
  The name of a configuration setting category, in capital letters,
  or the name of a configuration setting or default setting.

$SETTINGS
  The names of the configuration settings within a particular 
  configuration category.

$STALL
  " " if a command invoked with the "accept" or "default user" command 
  requires further approval; '' otherwise.
  Also, a count of commands that stalled.

$START
  The date of the earliest of a group of messages or requests.

$STATUS
  The result of a request:  succeed, stall, or fail.
  A kind of bounce message:  failure or warning.

$STRIPADDR
$STRIPUSER
  A stripped address does not include any comments, such as the person's
  full name.

$SUBJECT
  The Subject header of a posted message.

$SUBLIST
  The name of the auxiliary list to which a command applies (see
  "help auxiliary_list" for more information).

$SUBSCRIBED
  If a message was posted by a subscriber to the mailing list, this
  value is empty.  If not, it is the word "not".

$SUCCEED
  " " if a command invoked with the "accept" or "default user" command 
  succeeded; '' otherwise.
  Also, a count of commands that succeeded.

$TAG
  The tag that is used to mark the end of a here document.
  See "help here_document" for more details.

$TIME
  The time of day at which a request was processed.

$TOKEN
  The twelve-character identifier that is used to accept or reject
  a stalled command (see "help tokeninfo" for more information.)

$TOPIC
  When a help file is displayed, this value is replaced by the 
  name of the help file.

$TYPE
  The type of a stalled command, such as "confirm" if the person
  affected by the request must confirm the command, or "consult" if 
  the moderators must confirm the command.

  In the context of taboo pattern matches, this is the type of
  pattern that matched a header or body of a posted message, in
  capital letters (e.g., "TABOO_BODY").

$URL
  Identical to $CONFIRM_URL

$USER
  The e-mail address from which a Majordomo request was originally sent.
  (this needs to be reconciled with $REQUESTER)

$VALUE
  The value of a default setting.

$VICTIM 
  The e-mail address of the person affected by a Majordomo command.

$WELCOME
  " " if the owners' guide was mailed to the owners of a new mailing
  list; '' otherwise.

$WILLACK
  " " if an acknowledgement message will be mailed if a token is
  accepted or rejected; '' otherwise.


Extensions for error and format files
-------------------------------------

Beyond the standard reply files, Majordomo comes with error and format
files that determine the output of the individual Majordomo commands.
Error files are used to display explanations when a command is 
incorrect, not permitted, or otherwise unavailable.  Format files
display the output of the individual commands, and vary depending
upon the interface.  Currently, the e-mail and mj_shell interfaces
use the "text" format files, whereas the web interfaces use
the "wwwadm" and "wwwusr" format files.

There are three extensions to the substitutions which are used
by the error and format files. 

1. A keyword variable prefixed with a question mark instead of a dollar
sign will cause the whole line to be omitted from the output
if the value is not set.

Example:
  The archive is available on the web at ?ARCURL


2. A substitution value that is actually an array of values will
cause the same line to be displayed multiple times, once for
each value in the array.  Other substitutions on the same line, which
only have one value, will be displayed only on the first line.

Example:
  $LIST:-23 $DESCRIPTION

(This example is used by the lists command to display a list name and
a multiple-line description of the mailing list.  Although the list name 
only appears on the first line, a 23 space indentation appears on each 
succeeding line, which keeps the lines of the description aligned with
one another.)

3. The special $HELP substitution, following by a colon and the name 
of a help page (in upper-case letters), will cause a hypertext link 
to that page to appear in the output of the WWW interfaces.  In the text 
formatting files, the variable is simply replaced by the name of the 
page, in lower-case letters.

Example:
  You may change your delivery class using the $HELP:SET command.


See Also:
   help access_variables
   help admin_documents
   help announce
   help configset_access_rules  (for mailfile and deny usage)
   help configset_site_name
   help configset_welcome_files (for additional files that can be sent)
   help digest                  (for additional file names and usage)
   help error_files
   help format_files
   help get                     (obtain existing files)
   help help
   help here_document
   help put                     (create or update files by email)
   help reply_files

This is the "variables" help document for 
Majordomo 2, version 0.1200401130.

For a list of all help documents, send the following command:
   help topics
in the body of a message to mj2@smoe.org.

For assistance, please contact the smoe.org administrators.
Sign In Sign Out Subscribe to Mailing Lists Unsubscribe or Change Settings Help